SG Home
Wellness

Exercise tutorial

Barbell bench press

Learn a flat-bench press with both hands on one bar. The rack holds the bar between sets; it does not guide the repetition. You need a setup that lets you lift clear of the hooks, lower predictably and return the bar to both supports.

Watch a real demonstration

How To Do A Barbell Bench Press Correctly

Demonstration by PureGym

Loading the player connects to YouTube. Use its controls to play, pause or view full screen.

Version demonstrated: Flat-bench barbell press from a rack, with both feet supported.

Three things to notice

  • Locate the flat bench and the single bar held with two hands.
  • Follow the bar lowering towards the chest and pressing back above it.
  • Compare the feet, hips and upper back with their supports as the elbows move.

Written tutorial by SG Home Wellness. Setup, finishing steps and modifications also draw on the supporting sources; the clip may not show each of these actions.

Before you move

Equipment Barbell and compatible collars, Stable flat bench, Suitable rack, J-cups and safety system.

Also called Flat barbell bench press, Bench press.

  • Check the bench and rack instructions. Centre a stable flat bench between the supports. Have staff show you the compatible safety bars, arms or straps and how they lock. A rack without its safety components fitted is not a complete bench setup.
  • With a light training bar, fit the J-cups so you can clear them without lifting your shoulders off the bench. Test the safety height and coverage for your actual body position and bar path. If the available rack cannot provide a suitable setup, use another pressing option rather than improvising catches.
  • Check the bar mass before choosing plates; an empty bar can already be too heavy. Load both ends evenly and fit compatible collars. Arrange a competent spotter and agree on lift-off, help and reracking signals before lying down.
  • Lie with head, upper back and hips supported. Plant both feet or use an appropriate fixed foot platform. Wrap thumbs around the bar at a comfortable grip slightly wider than the shoulders. Keep the wrists above the forearms and settle the shoulder blades against the pad.

How to do the movement

  1. Lift clear of the supports

    With the agreed help if needed, straighten the arms enough to clear both hooks. Bring the bar over the chest and pause. Do not start lowering while the bar is still above the hooks.

  2. Lower the bar under control

    Bend the elbows and guide the bar towards the middle to lower chest. Let the upper arms angle away from the torso comfortably, rather than forcing them sideways. Breathe in without losing your supported position.

  3. Choose a repeatable bottom point

    Stop before your support or wrist alignment changes. A light touch or a small gap can be used according to your taught version; bouncing the bar off the chest is not part of either. Shorten a painful descent and reassess the setup.

  4. Press back to a steady top

    Breathe out as you push the bar upwards and slightly back towards the starting position. Keep both ends level and the hips on the bench. Pause over the chest before beginning another controlled descent.

Finish and get out of position

  • End while you can still return the bar. Once the arms have brought it to a stable top position, guide it back to both uprights with your spotter as agreed, then lower into both J-cups. Keep holding until the bar is visibly seated on both sides.
  • Do not reach back for the hooks from a half-finished repetition. Ask for the agreed assistance if the bar stalls. After reracking, pause before sitting and standing; unload and store the equipment without leaving one end heavily unbalanced.
Exercise reference

Keep the key cue

Bench press — test the rack setup, clear both hooks and rerack on both supports.

This browser keeps a reminder and link to the full tutorial.

Cues to remember

Clear, then lower

Separate the lift-off from the first repetition. A brief steady top lets you check that both hooks are behind the bar.

Keep the bar over the forearms

If the hands fold back or one elbow wanders, reduce the load and recheck grip symmetry.

Finish both sides in the hooks

A bar caught on only one J-cup is not reracked. Maintain the grip until both supports have taken it.

Must I copy a large powerlifting arch?

No. This tutorial uses stable head, upper-back, hip and foot support with a comfortable back position. A competition setup is a separate skill. Do not lift the hips or force your spine to imitate someone else.

What to watch out for

The first repetition hits the rack
Check bench position and whether the bar has moved fully clear before lowering. Rehearse with a manageable bar and a spotter.
One side rises faster
Stop and check equal plate loading and grip position. Use less resistance if the bar still tilts.
The hips leave the bench or the bar bounces
End the set and reduce the load. Keep the same support points through a controlled descent and press.

Make it easier or build from this version

A heavier successful push is not the whole task. Compare the same bar, bench position, support and range between sessions. Change one factor at a time and finish before you need an improvised exit. Pain or a rack component that will not lock needs a setup check, not another heavier attempt.

Make it easier

Use a lighter rackable bar

Keep the same rack, full grip and supported flat press. Ask staff about a suitable training bar if the standard bar is too heavy; still test the safety setup.

Use an elevated push-up

This is a different press that avoids handling a bar over the chest. Choose a fixed support and keep the head and hips moving with the chest.

Read the use an elevated push-up tutorial

Build from here

Add a small amount of resistance

Use your existing programme. Keep the same tested safety setup, grip and bottom point, and preserve control for the lift-off and rerack as well as the repetitions.

What can differ

Bar thickness, bench height, hook spacing and safety design vary. Refit them when you change stations. A fixed-weight bar may be shorter than a rackable bar and may not rest securely across the uprights. Check compatibility instead of balancing it on the edge. The incline and close-grip tutorials change the bench angle or grip; neither uses identical load expectations.

Muscles involved

Main involvement

  • Chest (pectoralis major). Brings the upper arms forwards and towards the centre during the press.

Supporting involvement

  • Front of shoulder (anterior deltoid). Assists the movement of the upper arm as the weight or body is pressed away.
  • Back of upper arm (triceps). Straightens the elbows during the upward phase.
Explore these muscle regions in 3D

This optional anatomy view shows the named muscle locations. Use the real demonstration and written tutorial above for technique.

Sources and video credits

The demonstration is published by PureGym and remains hosted by its publisher on YouTube.

SG Home Wellness provides the written tutorial using the sources below. Setup, finishing steps and modifications can extend beyond the clip. Controls on other equipment can differ.

The optional anatomy model has its own licence and attribution.

Coaching