SG Home
Wellness

Exercise tutorial

Supported standing calf raise

A calf raise practises lifting the heels by pressing through the front of the feet. A steady hand support lets you concentrate on how the ankles move.

Watch a real demonstration

Physiotherapy at Home | Heel Raises

Demonstration by Khoo Teck Puat Hospital / Yishun Health (NHG Health)

Loading the player connects to YouTube. Use its controls to play, pause or view full screen.

Version demonstrated: Both heels rise from a level floor while the hands use a chair back for support. This is not a single-leg or step-edge calf raise.

Three things to notice

  • Check the hand support and both feet on the floor before the heels rise.
  • Watch the heels lift as the front of each foot remains in contact with the floor.
  • Follow the return all the way to both heels settling on the floor; the lowering phase should stay controlled.

Written tutorial by SG Home Wellness. Setup, finishing steps and modifications also draw on the supporting sources; the clip may not show each of these actions.

Before you move

Equipment Non-slip level floor, Fixed rail or stable support.

Also called Standing heel raise, Two-leg calf raise, Double-leg heel raise.

  • Choose a level, non-slip surface and a fixed rail, stable counter or other suitable hand support. The video uses a chair back; only use a chair that stays in place and cannot tip when you press on it. Avoid a rolling chair.
  • Stand close enough that you can reach the support without bending the body forwards. Use both hands if needed. Keep that support available throughout the movement rather than treating letting go as the goal.
  • Place the feet comfortably apart with both heels on the floor. Keep the knees comfortably straight without forcefully locking them, and find a position where both ankles feel steady.
  • Use appropriate non-slip footwear or the foot-support advice you have been given. The demonstrator’s clothing or bare feet are not an instruction to copy the same footwear choice.

How to do the movement

  1. Start with both feet settled

    Rest the hands on the support and stand tall. Spread your weight comfortably across both feet. Check that the support stays still before lifting the heels.

  2. Lift through the front of the feet

    Raise both heels by pressing through the forefeet. Keep the body tall and the knees in roughly the same position. Let the ankles create the rise rather than pulling the body upwards with the arms.

  3. Use a height you can control

    Stop the rise before the ankles wobble sharply or the feet roll onto their outer edges. A smaller smooth lift is useful. Keep breathing and maintain the amount of hand support you need.

  4. Lower both heels smoothly

    Guide the heels back down until they settle on the floor. Avoid dropping or bouncing directly into the next rise. Reset your balance before repeating.

Finish and get out of position

  • Lower both heels fully and pause with both feet flat before taking your hands from the support. Stay holding it until your balance is settled.
  • Record the support and whether both heels rose evenly. Leave the support area clear; stop the practice if you feel new Achilles, foot or ankle pain.
Exercise reference

Keep the key cue

Calf raise — use steady support and lower both heels smoothly.

This browser keeps a reminder and link to the full tutorial.

Cues to remember

Keep the support within reach

Use enough hand contact to remain steady. The support is part of this version, so removing it is not required for progress.

Rise upwards rather than forwards

Keep the body tall and let the heels lift beneath you. If you bend over the support or push hard through the arms, try a smaller lift and recheck how close you stand.

Make the lowering smooth

Notice whether both heels come down together without a thud. Choose a smaller height if you cannot control the final part.

Do I need to stand on a step for a calf raise?

The version here starts and finishes on a flat floor. A step lets the heel go lower, adding range and balance demands that may be unsuitable for some people.

What to watch out for

Bouncing with repeated knee bends
Keep the knees in roughly the same position and lift more slowly through the ankles. Reduce the rise height until you can lower without a bounce.
Rolling sharply onto the outside of the feet
Lower the heels and reset. Use a smaller range while keeping pressure spread across the front of each foot instead of chasing maximum height.
Chair shifting or trying to remove needed hand support
Stop and choose a fixed or genuinely stable support. Keep the hands in place if they help you remain steady throughout the rise and return.

Make it easier or build from this version

Compare the same support and heel height across sessions before changing the task. Use your programme for repetitions and rest. Improve control while keeping the support you need; if you have Achilles rehabilitation instructions or restrictions after surgery, those take priority over this general guide.

Make it easier

A smaller supported heel lift

Keep both feet down between repetitions and raise the heels only a little. Practise returning smoothly while maintaining the hand support you need.

Seated heel raise

This is a different, seated version. Sit on a firm chair with both feet supported, lift both heels while the fronts of the feet stay down, then lower smoothly. The bent knees and supported body change the loading; do not treat it as an identical replacement in an individual rehabilitation plan.

Build from here

Add a brief controlled pause

Keep both hands available and pause briefly at a comfortable lifted height before lowering. Continue breathing and keep both ankles steady.

Make the lowering more controlled

With the same support and height, lower a little more slowly. A step edge or single-leg version adds different demands and is not required to progress this exercise.

What can differ

The video shows both heels rising on a level floor with chair support. A fixed rail or suitable counter can change the hand support while keeping that same leg action. A seated heel raise changes the knee position and body loading. A step edge, a single-leg raise or added weights changes the task further; none is a required next step. Keep useful support and stop if you cannot stay steady or develop foot, ankle or Achilles pain.

Muscles involved

Main involvement

  • Surface calf (gastrocnemius). Helps press the front of the foot down as the heel lifts.
  • Deep calf (soleus). Also drives the ankle movement, including when the knee is bent.
Explore these muscle regions in 3D

This optional anatomy view shows the named muscle locations. Use the real demonstration and written tutorial above for technique.

Sources and video credits

The demonstration is published by Khoo Teck Puat Hospital / Yishun Health (NHG Health) and remains hosted by its publisher on YouTube.

SG Home Wellness provides the written tutorial using the sources below. Setup, finishing steps and modifications can extend beyond the clip. Controls on other equipment can differ.

The optional anatomy model has its own licence and attribution.

Coaching