SG Home
Wellness

Exercise tutorial

Inverted row under a fixed bar

An inverted row pulls your body towards a horizontal bar while your feet remain on the floor. The bar is the hand support and bodyweight supplies resistance. Moving the bar height and foot position changes the demand without adding a machine or lifting plates.

Watch a real demonstration

How To Do Inverted Rows

Demonstration by PureGym

Loading the player connects to YouTube. Use its controls to play, pause or view full screen.

Version demonstrated: Overhand bodyweight row beneath a barbell set in a rack, with straight legs and heels supported on the floor.

Three things to notice

  • Identify the horizontal bar and the heels staying on the floor.
  • Compare the chest and hips as the body rises towards the bar.
  • Follow the elbows straightening as the body lowers beneath the bar.

Written tutorial by SG Home Wellness. Setup, finishing steps and modifications also draw on the supporting sources; the clip may not show each of these actions.

Before you move

Equipment Fixed horizontal bar, or a rack/bar arrangement approved for inverted rows, Non-slip floor and clear space beneath the bar.

Also called Bodyweight row, Rack row, Barbell inverted row.

  • Use a fixed bar or a rack arrangement explicitly suitable for inverted rows. Ask staff to check that the rack is stable, the attachments are locked and pulling cannot lift the bar out, roll it or slide it sideways. Do not improvise by loading plates onto a loose bar to hold it down.
  • Clear the floor beneath and behind you. Set the bar height before getting underneath. A higher bar generally lets you row from a more upright body angle. Start where both the pulling movement and getting down and up are manageable.
  • Take an overhand grip around shoulder width or a little wider, with thumbs around the bar. Position yourself so the bar is roughly over the chest at the top of the pull. Test the support with the feet carrying most of your weight before leaning farther back.
  • Keep your feet where they will not slide. With straight legs, support through the heels and make a long line from head to heels. Bending the knees and keeping the feet closer is a written easier modification. Choose the version before starting, and know where you will sit or stand to finish.

How to do the movement

  1. Make a steady starting line

    Lengthen the elbows while keeping the hips supported by the trunk and legs. Keep the head following the body instead of dropping it backwards. Allow the shoulder blades to move as the arms reach.

  2. Pull the chest towards the bar

    Bend the elbows and draw them back, moving the chest and hips together. Breathe out through the effort. Keep foot contact steady rather than pushing repeatedly with the legs.

  3. Stop before the line breaks

    Finish the pull where you can keep the hips from sagging and the shoulders comfortable. Chest contact is optional; do not jut the chin over the bar to create an extra centimetre.

  4. Lower the whole body smoothly

    Straighten the arms under control and keep the trunk moving as one unit. Reset the body line before the next pull. If the feet slide or the bar moves, stop and unload the hands.

Finish and get out of position

  • Return to the comfortable long-arm position, then bring the feet into the position you planned for an easier angle or lower the hips into a supported seated position. Keep the grip until your feet or seat take the weight.
  • Release the bar only once you are stable, then get up by a route you can manage. If floor transfers are awkward, use a higher fixed bar and more upright version with instruction instead of copying the low demonstration.
Exercise reference

Keep the key cue

Inverted row — secure the bar first, keep feet planted and move chest and hips together.

This browser keeps a reminder and link to the full tutorial.

Cues to remember

Chest and hips travel together

If the chest reaches the bar while the hips remain behind, raise the bar or bend the knees to reduce the demand.

A still bar is essential

Any lifting, rolling or sliding changes the support. Stop and have the rack checked rather than gripping harder.

Finish with the arms

Bring the chest towards the bar by bending the elbows. Poking the head forward does not complete a row.

Must I move the bar lower every week?

No. A higher secure bar can remain useful. Bar height, foot placement, knee bend and body proportions all affect the task. Compare control in the same setup before changing one thing; a lower bar is not a fitness score.

What to watch out for

Hips sag while the chest rises
Use a more upright angle or bend the knees. Keep the head, chest and hips moving together through a smaller controlled pull.
The bar lifts or rolls in its supports
Stop immediately and put your weight through the feet or seat. Have staff provide a properly secured setup; extra effort cannot correct an unsafe support.
Feet slide or the heels lose their place
Reset on a non-slip surface with a manageable body angle. Do not add speed or swing the legs to maintain the repetition.

Make it easier or build from this version

Record bar height, foot position and whether the knees were bent. A row under a bar is a horizontal pull; a pull-up is a different overhead exercise. Neither is a compulsory next step. Recheck the support every time the rack setup changes.

Make it easier

Higher bar and more upright angle

This adjusts the same bodyweight row. Use a suitable secured higher bar, keep the feet planted and pull the chest towards it without dropping the hips.

Bend the knees

Keep the same approved bar but bring the feet closer and bend the knees. Maintain a steady line from shoulders to knees and lower smoothly; this changes the lever, not the bar-security checks.

Build from here

Change one leverage detail

If your programme calls for more challenge, use a slightly lower approved bar or move the feet to create a more horizontal angle. Recheck the body line and exit before adding repetitions.

Keep the return controlled for longer

With the same bar and stance, lower more deliberately while breathing. Stop when the hips sag; lifting the feet onto an unstable object is not required.

What can differ

The video uses straight legs beneath a rack bar. Bent knees, a higher fixed bar and a more upright angle are written modifications. Rings and suspension straps add different moving handles and require their own anchors. A Smith-machine bar can only be used if the gym approves its locking and loading arrangement; this tutorial does not supply machine-specific locking instructions.

Muscles involved

Main involvement

  • Sides of the back (latissimus dorsi). Draw the upper arms towards the torso during the pull.
  • Between the shoulder blades (trapezius and rhomboids). Help guide and steady the shoulder blades as the arms move.

Supporting involvement

  • Front of the upper arms (biceps). Bend the elbows during the pull.
  • Palm-side forearm muscles. Maintain the grip on the bar, handle or dumbbells.
  • Back of the shoulders (posterior deltoids). Help draw the upper arms backwards.
  • Abdominal muscles. Help steady the trunk while the arms pull.
Explore these muscle regions in 3D

This optional anatomy view shows the named muscle locations. Use the real demonstration and written tutorial above for technique.

Sources and video credits

The demonstration is published by PureGym and remains hosted by its publisher on YouTube.

SG Home Wellness provides the written tutorial using the sources below. Setup, finishing steps and modifications can extend beyond the clip. Controls on other equipment can differ.

The optional anatomy model has its own licence and attribution.

Coaching