A pull-up lifts your body towards an overhead bar using an overhand grip. It places substantial demand on the back, arms and grip because the whole body hangs from the hands. It is an option for people ready for that task, not an exercise everyone needs to achieve.
Written tutorial by SG Home Wellness. Setup, finishing steps and modifications also draw on the supporting sources; the clip may not show each of these actions.
Before you move
Equipment Secure overhead pull-up bar, Suitable stable access platform where needed.
Also called Pull up, Pronated pull-up, Strict pull-up.
Use a bar designed to support hanging exercise and check the rack or mounting is secure. Leave clearance above the head, beneath the feet and around the body. Do not use an unknown doorway fitting or a rack that moves when you test it.
Plan the entry and dismount before hanging. Use a suitable stable platform to reach the bar when needed, with staff help for the arrangement. It must be reachable again at the end without a swinging leap. A loose chair or stack of plates is not an access platform.
Grip the bar with palms facing away and thumbs wrapped around it, around or a little wider than shoulder width as comfortable. Establish the grip while the feet are supported. A very wide grip is not required to make it count.
Take the weight into the hands gradually and check that you can hang comfortably without slipping or swinging. Keep the legs clear and gently steady the trunk by bringing the ribs over the pelvis. If you cannot control the hanging start and return, use a more supported pulling option rather than repeatedly jumping at the bar.
How to do the movement
Begin from a comfortable overhead reach
Let the arms lengthen without dropping suddenly into the shoulders. Settle any swing before pulling. The shoulder blades can move as the arms move; do not force them rigidly down throughout the overhead return.
Bring the elbows down
Pull the body upwards as the elbows bend and move towards the sides of the torso. Breathe out through the effort. Keep the legs quiet rather than kicking to start the repetition.
Use a controlled top position
Rise as far as you can while keeping the neck following the trunk. The usual full repetition brings the chin to bar height or above, but craning the neck or jerking to pass the bar is a cue to use assistance or another exercise.
Guide the body down
Lower smoothly as the elbows straighten and the arms return overhead. Finish at a comfortable long-arm position without a sudden drop. Only begin another repetition if the grip and body position remain controlled.
Finish and get out of position
Finish before the grip is close to opening. Return towards the long-arm position under control, place the feet onto the planned stable support or floor, and let that support take your weight before releasing the bar.
Pause once standing. If the entry or descent needed an unexpected jump, have the access setup changed before another set. Do not make repeated uncontrolled lowering attempts simply because you can reach the top.
Exercise reference
Keep the key cue
Pull-up — secure access, quiet legs and enough grip for a smooth return to foot support.
This browser keeps a reminder and link to the full tutorial.
Cues to remember
Move the body without a kick
Compare leg movement with the pull. A large knee swing or repeated hip snap makes this a different task.
Keep the neck with the trunk
Look ahead naturally and bring the body up. Reaching the chin forward can hide that the pulling range has ended.
Keep enough grip to get down
The finish needs control too. End earlier when the hands begin slipping instead of waiting until you have to drop.
Do I need a pull-up before a row is useful?
No. Rows and overhead pulls load the body differently, and adjustable free weights can remain part of training at any level. A pull-up is a substantial bodyweight task, not a prerequisite for useful back training.
What to watch out for
Kicking or swinging starts every repetition
Return to foot support and reset. Use a more manageable assisted arrangement with instruction, or a supported row, instead of trying to turn the swing into a strict repetition.
The last part becomes a chin reach
Keep the head following the trunk and stop the set before the neck has to crane. Ask about assistance rather than forcing height with a head movement.
The return ends in a shoulder drop or slipping grip
End the set earlier and use the planned foot support. If a smooth overhead return is not manageable, choose a different pulling task today.
Make it easier or build from this version
Record grip, bar and any assistance. There is no universal timetable for a first pull-up and no need to train through shoulder, elbow or hand pain. Compare controlled work in the same setup instead of treating a partial swing and a strict repetition as interchangeable.
Make it easier
Learn a supported horizontal pull
The inverted row is a different exercise with foot support and adjustable body angle. It lets you practise pulling while choosing a manageable amount of bodyweight through the hands.
An instructor can help choose an appropriate intact band and an approved anchor, and teach entry and exit. The overhand pull and controlled return remain, but band tension changes through the repetition. Do not loop a band under your feet without first learning how to prevent it slipping or recoiling.
Build from here
Add controlled work within your plan
Keep the same grip and range while adding planned work only if the last return remains smooth. More repetitions should not turn into more kicking.
Practise the same repetition more deliberately
Keep the same bodyweight and bar and make the top and return predictable. Added hanging weights are unnecessary for learning; any later loading needs separate equipment and instruction.
What can differ
An underhand chin-up changes the grip and elbow path. Neutral parallel handles are another version. Band assistance changes the support and adds elastic recoil; use only an intact suitable band fitted and entered as its maker and an instructor show you. Never improvise an anchor or let a tensioned band snap free. A weighted pull-up and a kipping pull-up are separate tasks, not required progressions.
Muscles involved
Main involvement
Sides of the back (latissimus dorsi). Draw the upper arms towards the torso during the pull.
Supporting involvement
Between the shoulder blades (trapezius and rhomboids). Help guide and steady the shoulder blades as the arms move.
Front of the upper arms (biceps). Bend the elbows during the pull.
Palm-side forearm muscles. Maintain the grip on the bar, handle or dumbbells.
Abdominal muscles. Help steady the trunk while the arms pull.
Explore these muscle regions in 3D
This optional anatomy view shows the named muscle locations. Use the real demonstration and written tutorial above for technique.
Sources and video credits
The demonstration is published by PureGym and remains hosted by its publisher on YouTube.
SG Home Wellness provides the written tutorial using the sources below. Setup, finishing steps and modifications can extend beyond the clip. Controls on other equipment can differ.