SG Home
Wellness

Exercise tutorial

Lat pulldown

The lat pulldown practises pulling an overhead cable attachment down in front of the body. The back muscles and elbow flexors contribute while the seat and thigh pad support your position. The aim is a controlled overhead pull and return, rather than bringing the bar down by swinging your body backwards.

Watch a real demonstration

How To Do A Lat Pulldown

Demonstration by PureGym

Loading the player connects to YouTube. Use its controls to play, pause or view full screen.

Version demonstrated: Conventional seated overhead cable lat pulldown with a long bar and thigh restraint.

Three things to notice

  • Locate the overhead cable, long bar and thigh restraint in this seated variation.
  • Follow the bar down in front of the face towards the upper chest.
  • Watch the elbows straighten as the bar returns overhead, and compare the torso angle.

Written tutorial by SG Home Wellness. Setup, finishing steps and modifications also draw on the supporting sources; the clip may not show each of these actions.

Before you move

Equipment Lat pulldown station, Compatible bar or handle.

Also called Seated lat pulldown, Front pulldown, Cable pulldown.

  • Check the cable, bar and attachment clip with the resistance at rest. The attachment must be securely connected and clear to travel. Select a resistance you can control; do not change the selector while somebody is pulling on the cable.
  • Set the seat and thigh pad so your feet are supported and the pad holds your thighs comfortably when you sit. It should help keep you seated without painfully trapping the legs. Check how to slide out or release the pad before beginning.
  • For the demonstrated station, fit the thigh pad while seated, then stand on the floor to take a secure overhand grip around or somewhat wider than shoulder width. Hold the bar as you sit beneath the pad. If the bar cannot be reached from stable floor support or you cannot control sitting with it, ask staff to show the station’s entry method; do not climb onto the seat.
  • Sit with your thighs under the pad and arms reaching overhead. Set a small, comfortable backward lean so the bar has a clear path in front of your face. Keep that torso angle steady during the repetition and keep the feet planted.

How to do the movement

  1. Start tall under the cable

    Begin with the arms comfortably extended overhead and the torso supported by your seated position. Avoid yanking the bar from a completely relaxed hang. Keep breathing and let the shoulders move naturally rather than forcing them down throughout the whole return.

  2. Guide the elbows down

    Pull the bar towards the upper chest as the elbows travel down. Breathe out during the pull. Keep the bar in front of the head and the torso angle mostly unchanged. Stop at a comfortable endpoint; touching the chest is not compulsory.

  3. Follow the bar upwards

    Let the elbows straighten as the cable returns overhead. Control the upward pull so the pad does not have to catch your body suddenly. Return to the same comfortable reach without dropping the stack or throwing the bar upwards.

Finish and get out of position

  • Guide the bar up until the resistance is at rest, keeping control of the attachment. Do not let go while the cable is still lifting the stack.
  • With the resistance unloaded, follow the station’s entry and exit method to clear the thigh pad and return the bar to rest. Ask staff for help if the bar height makes releasing it awkward; do not jump or climb to reach it.
Exercise reference

Keep the key cue

Stop for shoulder pain, a loose clip or a damaged cable. Ask staff to demonstrate an unfamiliar high-bar entry rather than attempting to reach it from an unstable surface.

This browser keeps a reminder and link to the full tutorial.

Cues to remember

Bar travels in front

Give the bar a clear path in front of the face. Do not duck the head to pull behind the neck or turn the movement into a behind-neck variation.

Stay seated

If the upward pull lifts you off the seat, recheck both pad fit and resistance. Tightening the pad harder is not the only answer; the load still needs to be controllable.

Keep the lean steady

A slight starting lean makes room for the bar. A large backward swing to begin each repetition changes the task and usually signals that the resistance needs adjusting.

Does the bar have to touch my chest?

No. Pull towards the upper chest and finish where you can keep a comfortable front-of-body path and steady torso. Forcing contact by swinging backwards or bending the wrists does not improve the repetition.

What to watch out for

The torso swings far backwards to pull the bar down.
Reduce the resistance and keep the same small starting lean. End the pull before you need to turn it into a whole-body rocking movement.
The bar is pulled behind the head or the chin ducks out of its way.
Reset the seated position and use a front-of-body path with enough clearance. Stop if you cannot find a comfortable path.
The body lifts off the seat on the return.
Recheck the thigh restraint and use a lighter load that you can return smoothly. Keep the feet supported instead of bracing against nearby equipment.

Make it easier or build from this version

Record the station, attachment, grip, pad setting, resistance and repetitions. Different pulley ratios and bars change the task, so stack numbers from another station are not a direct comparison. A pull-up is a separate exercise with different entry and body-weight demands, not a required next level.

Make it easier

Use a lighter cable setting

Keep the same bar and supported position while reducing resistance. Practise controlling the overhead return as well as the downward pull.

Find a comfortable grip and endpoint

Keep the long-bar seated pulldown and thigh support. Choose a comfortable allowed grip and stop the pull where you can hold the same torso angle. Control the overhead return; changing grip or endpoint does not make an unmanageable load suitable.

Build from here

Add a repetition within your plan

Keep the same bar, grip and torso angle while adding a controlled repetition if your programme allows. Finish before you need to swing to complete the pull.

Increase the cable resistance appropriately

Use a suitable available increment and check that the return still stays controlled. If the increase lifts you from the seat or changes your movement, go back to the earlier setting.

What can differ

Neutral-grip handles and independent-lever machines are valid separate variations, but their handle paths and setup differ. This tutorial shows a conventional overhead cable and long bar. A floor-seated cable pull lacks the same seat and thigh support and should not be labelled as this version.

Muscles involved

Main involvement

  • Sides of the back (latissimus dorsi). Draw the upper arms down towards the torso from overhead.

Supporting involvement

  • Front of the upper arms (biceps). Help bend the elbows as the handle comes down.
  • Between the shoulder blades (middle trapezius). Helps guide the shoulder blades as the upper arms move.
Explore these muscle regions in 3D

This optional anatomy view shows the named muscle locations. Use the real demonstration and written tutorial above for technique.

Sources and video credits

The demonstration is published by PureGym and remains hosted by its publisher on YouTube.

SG Home Wellness provides the written tutorial using the sources below. Setup, finishing steps and modifications can extend beyond the clip. Controls on other equipment can differ.

The optional anatomy model has its own licence and attribution.

Coaching