SG Home
Wellness

Exercise tutorial

Resistance-band row

This is a horizontal pull. As your elbows travel back, your upper arms and shoulder blades move while your trunk stays steady. The band typically pulls harder as it lengthens, so the final part of the row can feel different from the start.

Watch a real demonstration

How to do a Standing Tubing Row

Demonstration by National Academy of Sports Medicine (NASM)

Loading the player connects to YouTube. Use its controls to play, pause or view full screen.

Version demonstrated: Standing, two-arm horizontal row with resistance tubing anchored in front of the body.

Three things to notice

  • Look at the fixed anchor in front of the demonstrator and the standing support through both feet.
  • Follow both handles towards the torso as the elbows bend and travel backwards.
  • Follow the handles away again as the arms lengthen and the tubing shortens.

Written tutorial by SG Home Wellness. Setup, finishing steps and modifications also draw on the supporting sources; the clip may not show each of these actions.

Before you move

Equipment Long resistance band or tubing, Compatible fixed anchor.

Also called Standing band row, Standing tubing row, Two-arm band row.

  • Inspect the full length of the band or tubing, including its ends and handles, for splits, wear or loose parts. Check closely where it attaches. Use an anchor and attachment approved for that product and follow its precautions, including eye protection where specified. A door handle or movable chair is not a rated anchor.
  • Position the anchor roughly at chest height for this standing horizontal row. Follow the manufacturer’s fitting and stretch limits. If using a purpose-made door anchor, follow its door-position instructions and make sure nobody can open the door while you exercise.
  • Face the anchor with feet around hip to shoulder width and knees softly bent. Clear space around the band so it cannot rub across a sharp corner or catch another person.
  • Hold both handles evenly, wrists in line with the forearms. Take up a small amount of slack with your arms reaching forward. You should be able to stand still without leaning backwards to hold the start position.

How to do the movement

  1. Settle the start position

    Keep your feet planted and chest facing the anchor. Let the shoulders sit comfortably and check that the attachment remains still when gentle tension is applied. Stop if it shifts.

  2. Draw the elbows back

    Breathe out and pull both handles towards the sides of your ribs. Allow the shoulder blades to move towards each other as the elbows bend; avoid forcing the shoulders down or squeezing so hard that you arch your back.

  3. Keep the torso quiet

    End the pull while you can stay upright without rocking back. The band becomes more demanding as it stretches, so the last part may require less reach than you expected. Do not force the handles to touch your body.

  4. Return against the band

    Breathe in and let the arms lengthen towards the anchor. Keep a hold of the handles as the band shortens. Settle in the starting position before the next pull instead of letting the band jerk you forwards.

Finish and get out of position

  • Bring the handles forward under control, then move closer to the anchor to reduce tension while keeping hold of the band. Release the handles only when the band is slack.
  • Detach or store the band according to its instructions. Keep it out of walking routes and note the band model and starting distance if you want to reproduce the session.
Exercise reference

Keep the key cue

Band row — secure the anchor, draw the elbows back and control the return.

This browser keeps a reminder and link to the full tutorial.

Cues to remember

Let the elbows lead

Drawing the elbows back can make the movement easier to recognise than thinking only about bringing the handles to you.

Keep your trunk steady

If your chest leans farther back every time your hands come towards you, the band may be pulling harder than you can control at that distance.

Does the colour tell me exactly how heavy a band is?

Colour only helps within a particular manufacturer's system. The same band also feels different depending on how much it stretches. Note the band and where you stood when recording the exercise.

What to watch out for

Leaning backwards to make the handles reach the ribs
Reduce the tension with a lighter band or a position closer to the anchor, within its setup instructions. Keep the pull in the arms and shoulder blades.
Shrugging or bending the wrists to finish
Lower the tension and guide the elbows back beside the body. Maintain a comfortable shoulder position and straight wrist instead of pulling farther at any cost.
Letting the band snap back or releasing stretched handles
Slow the return and finish before your grip fades. Walk towards the anchor to remove tension before putting the band down.

Make it easier or build from this version

Band colour is not a universal weight scale. Record the brand or model, anchor height and where you stood. Change one factor at a time and follow your programme’s sets and repetitions. A band’s convenience does not remove the need for a secure anchor; if there is no suitable attachment, use a different rowing setup.

Make it easier

Lighter tubing or less starting stretch

Keep the same standing row but reduce the resistance. Ensure there is still a predictable starting position; never exceed the manufacturer’s stretch limits to compensate for the wrong band.

A shorter controlled pull

Stop earlier if the final stretch makes you lean or shrug. Restore a longer arm movement gradually only when the trunk can stay steady.

Build from here

A small increase in band resistance

Use the next appropriate band or a slightly more challenging starting stretch within the product’s limits. Keep the anchor height, stance and elbow path the same so you can judge the change.

What can differ

This video uses standing resistance tubing with an anchor in front. A seated row changes the support arrangement; looping a band under your feet uses a different anchor. Neither is an instruction to improvise with the standing setup. Anchor height, handle type and distance change the line of pull and starting stretch. Follow your own product’s fitting and stretch limits, keep the anchor still, and release the handles only after reducing the tension.

Muscles involved

Main involvement

  • Mid-upper back (middle trapezius). Helps draw the shoulder blades towards the spine.
  • Muscles between the shoulder blades (rhomboids). Assist the shoulder blades in moving inward during the pull.
  • Broad back muscles (latissimus dorsi). Help draw the upper arms back, with involvement changing as the elbows travel closer to or farther from the body.

Supporting involvement

  • Back of shoulder (posterior deltoid). Assists the upper arm as it moves backwards.
  • Front of upper arm (biceps). Works with other elbow flexors as the elbows bend.
Explore these muscle regions in 3D

This optional anatomy view shows the named muscle locations. Use the real demonstration and written tutorial above for technique.

Sources and video credits

The demonstration is published by National Academy of Sports Medicine (NASM) and remains hosted by its publisher on YouTube.

SG Home Wellness provides the written tutorial using the sources below. Setup, finishing steps and modifications can extend beyond the clip. Controls on other equipment can differ.

The optional anatomy model has its own licence and attribution.

Coaching